Introduction
If you are building a new home in Indore, you have a rare and valuable opportunity: the chance to integrate home automation company in Indore. While retrofitting smart systems into an existing home is entirely possible, building with automation in mind from the start delivers superior results at lower cost and with significantly less disruption. This guide explains how to approach automation planning for new builds.
Why New Construction Is the Ideal Time
Open walls, accessible ceiling cavities, and the presence of electrical contractors on-site make new construction the perfect environment for home automation integration. Installing conduits, running structured cabling, positioning control panels, and planning network infrastructure at this stage is faster, cleaner, and cheaper than doing the same work after plaster and paint.
More importantly, planning automation at the design stage allows you to position switches, sensors, and control panels in their optimal locations rather than being constrained by where conventional switch boards happen to have been placed.
Involving Your Automation Company Early
The critical first step is engaging your home automation company during the design phase — ideally before your architect finalises the electrical drawings. The automation company should review the floor plan and provide input on switch board locations, conduit requirements, network point positions, and any structural considerations for mounting panels or equipment.
This early involvement is typically free or low-cost and can save significant money during construction by avoiding the need for modifications later.
Structured Cabling Infrastructure
One of the most important investments in a new construction automation project is structured cabling. A good home automation installation at construction time includes:
Cat 6 or Cat 6A network cables run to every room for wired internet connections and smart device connectivity. An equipment room or network cabinet that houses the router, switches, and home automation hub. Conduits run from the equipment room to all switch boards, allowing cables to be added or replaced in the future without opening walls.
This infrastructure investment is relatively low at construction time (typically Rs. 30,000-80,000 for a 4-bedroom house) but provides the backbone for a reliable smart home for decades.
Planning for Smart Switch Boards
Traditional switch boards are designed for conventional rocker switches. Smart home switch boards need to accommodate deeper smart switches or touch panels, potentially with additional wiring. Plan for deeper junction boxes, adequate neutral wire availability, and larger conduit capacity than standard electrical work requires.
Choosing the Right System Architecture
New construction projects have the luxury of choosing the optimal system architecture without compromise. For premium homes, this typically means a KNX or similar hardwired protocol for lighting and HVAC control, structured IP network for cameras and access control, and integration of all systems through a central controller. The result is a system with exceptional reliability and longevity.
Future-Proofing Decisions
Build in more capacity than you think you need. Double the number of conduits. Add network points to rooms where you do not currently plan devices. Specify deeper junction boxes throughout. These provisions cost very little at construction time but can save substantial money and disruption later when your requirements evolve.
Coordination with Other Contractors
Home automation at new construction requires coordination between the automation company, the electrical contractor, the civil contractor, and sometimes the HVAC installer. Your automation company should be comfortable managing this coordination or, at minimum, providing clear technical specifications to the other contractors.
Working with Schlau Automation on New Builds
Schlau Automation has specific expertise in home automation company in Indore. Their team works closely with architects, builders, and electrical contractors to ensure the automation infrastructure is correctly specified and installed during construction. Their new build packages are designed to maximise long-term value and minimise the cost of future modifications.
Conclusion
If you are building a new home in Indore, the decision to integrate home automation from the start is one of the best investments you can make. The cost differential compared to retrofitting is minimal, the quality of outcome is superior, and the result is a home that will deliver smart living benefits for decades. Start the conversation with your automation company today — before the foundation is laid if possible.